LCD Display Instructions for Model: 124 DX LCD
To tum on the display, press on the Power button for a few seconds. Do the same to turn it off.
Lights
To turn the lights on, press once quickly on the Power button. Press again to tum the lights off.
Adjust Your Controller Settings
A) To adjust settings, press the menu button “M and the Adjustment button (arrow) at the same time for a few seconds (1 – 3 seconds). The display then switches to “Settings* Mode:
B) In this mode, each parameter is shown as “PXX*. The digits below PXX show the current parameter setting.
C) To view the different settings, press once on the power button.
Settings Are As Follows:
- P01 – Background Light Brightness. Default setting is 6. You can select an option between 0-9.
- P03 – Voltage Setting. You can adjust the setting per the type of battery you have (24V /
36V / 48V). Default is set on 36V. - P04 – Automatic Shut Off. This allows you to determine when the power automatically shuts off. Default is 10 minutes. Range: 0-99 minutes.
- P08 – Wheel diameter setting. Ranges from 6/8/10/12/14/16/18/20 inches
- P10 – Speed limit – Default is 27 mph or 25 km/h (legal requirements) Range options: 10-41 km/h